What is the rod at both ends? Your life depends on them!
All vehicles, regardless of what brand or model of the rod end of the
The only two vehicles with rack and pinion steering, but on others, there are four.
One end of the lever attached to each rack and pinion steering front wheel knuckle.
In non-R Standard & Poor's steering, steering knuckle and control of each front wheel to the two wheels of a long strip, known as the lever rod.
The purpose of this link to connect to the rocker arm, steering gearbox and stability are also connected to the bracket arm.
Non-R & P right-hand thread and left hand threaded sleeve screws, small rod end.
When a group you have the toe of your vehicle, the technician can loosen two bolts and nuts, screw this set of "... This makes the tire out or in.
The rod end lubrication every time you change the engine oil and filters, it is very important.
Why? Well, if you do not grease, when did you? :-)
In the importance of lubrication, so they move freely.
If they get dry, they will soon wear.
If they wear, they can separate.
If they separate, you will not be able to guide the vehicle. Not a good thing.
Now, grant you, some new car manufacturers have decided to leave the nozzle.
The lever to pre-packaged, and will continue for a long period of time.
However, you should have a 'check' at each oil change.
Nozzle threaded holes, but they have their small cap.
Can remove the cap, grease, so you can add a suitable.
You can always replace the rod end to ensure that the grease it, if you can, and other.
Take care of your car, so it will take care of you and your family!
No comments:
Post a Comment